DIY repair · Nissan Patrol Y62 / Armada

Thermostat and water pump

DIFFICULTY 3 / 5TIME ≈ 2–4 hoursCOST Parts plus labor

Symptoms

Overheating, an engine that runs cold, an erratic temperature gauge, or coolant weeping from the front of the engine.

The fix, step by step

  1. Know your series first.
  2. Patrolapart lists an 82°C thermostat that needs no gasket for Series 1 and 2 trucks, and an electronically controlled thermostat assembly for Series 3 trucks from February 2016.
  3. Drain the coolant, replace the thermostat (and the water pump and its separate gasket, if it's leaking or noisy), refill with Nissan blue long-life coolant and bleed the system.

Tools & part numbers

  • Socket set
  • drain tray
  • coolant funnel
  • torque wrench

Where to buy the parts

Genuine Nissan thermostat 82°C, Y62 Series 1–2Patrolapart ↗Amazon ↗
Genuine Nissan electronic thermostat assembly, Y62 S3 on (02/2016–)Patrolapart ↗Amazon ↗
Genuine Nissan water pump, Y62 VK56Patrolapart ↗Amazon ↗
Genuine Nissan water pump gasket, Y62Patrolapart ↗Amazon ↗

Hunting a used or discontinued part? Search eBay Motors for Nissan Patrol Y62 / Armada parts →

Before you start

Rated for a competent home mechanic with a decent tool kit. Confirm torque figures, fluids and procedures against the factory service manual for your VIN, support the truck on stands rather than a jack, and work at your own risk (disclaimer). Some parts links are affiliate links, which pay us a small commission at no cost to you.

The Boxy Dispatch · monthly

One new guide, one featured rig, one recall worth knowing. Monthly, no spam.

Subscribe and get a free printable inspection checklist for any truck we cover.