DIY repair · Nissan Patrol Y62 / Armada

Serpentine belt and tensioner

DIFFICULTY 2 / 5TIME ≈ 1 hourCOST Parts plus labor

Symptoms

Squeal from the front of the engine, a vibrating belt, or a cracked or glazed belt.

The fix, step by step

  1. Note the belt routing before you start.
  2. Rotate the automatic tensioner to release the tension and remove the belt.
  3. Check the tensioner and idlers for noise and wobble, and replace the tensioner if it's weak.
  4. The belt drives the alternator, power steering pump and A/C compressor, so a failure can mean losing power steering and charging.
  5. Fit the new belt and release the tensioner slowly.

Tools & part numbers

  • Long-handled ratchet or belt tool
  • torch

Where to buy the parts

Gates serpentine engine fan belt, Y62 VK56Patrolapart ↗Amazon ↗
Febest auto belt tensioner, Y62Patrolapart ↗Amazon ↗
Belt tensioner, 2018 Armada 5.6LRockAuto ↗Amazon ↗

Hunting a used or discontinued part? Search eBay Motors for Nissan Patrol Y62 / Armada parts →

Before you start

Rated for a competent home mechanic with a decent tool kit. Confirm torque figures, fluids and procedures against the factory service manual for your VIN, support the truck on stands rather than a jack, and work at your own risk (disclaimer). Some parts links are affiliate links, which pay us a small commission at no cost to you.

The Boxy Dispatch · monthly

One new guide, one featured rig, one recall worth knowing. Monthly, no spam.

Subscribe and get a free printable inspection checklist for any truck we cover.