DIY repair · Toyota Land Cruiser Prado 150

Early brake booster and master cylinder (pre-2012)

DIFFICULTY 3 / 5TIME Half a dayCOST Parts plus labor

Symptoms

A spongy or very hard pedal with a hissing booster.

The fix, step by step

  1. Unsealed 4X4 says the common fix is to swap both the booster and master cylinder for the revised parts from a later Prado, then bleed the brakes.

Tools & part numbers

  • Flare-nut wrenches
  • brake bleeding kit
  • DOT fluid

Where to buy the parts

150 Series / GX460 parts catalogue (brakes)CruiserTeq ↗

Hunting a used or discontinued part? Search eBay Motors for Toyota Land Cruiser Prado 150 parts →

Before you start

Rated for a competent home mechanic with a decent tool kit. Confirm torque figures, fluids and procedures against the factory service manual for your VIN, support the truck on stands rather than a jack, and work at your own risk (disclaimer). Some parts links are affiliate links, which pay us a small commission at no cost to you.

The Boxy Dispatch · monthly

One new guide, one featured rig, one recall worth knowing. Monthly, no spam.

Subscribe and get a free printable inspection checklist for any truck we cover.