DIY repair · Toyota 4Runner 6th Gen

Engine oil and filter (2.4 turbo)

DIFFICULTY 1 / 5TIME ≈ 1 hourCOST Oil and a filter

Symptoms

Every 10,000 miles or 12 months normally; every 5,000 miles or 6 months when mostly on dirt or dusty roads, per the maintenance chart.

The fix, step by step

  1. Remove the access panel, drain the oil and change the filter.
  2. Owners cite a 5.9-qt capacity.
  3. A member confirmed 30 ft-lb for the drain plug from dealer repair documentation; filters are typically spun on hand-tight plus about three-quarters of a turn.
  4. Reset the maintenance reminder.

Tools & part numbers

  • Drain pan
  • filter wrench
  • torque wrench
  • new drain-plug washer
  • Toyota-spec synthetic oil

Where to buy the parts

Oil filter (Toyota 90915-YZZN1)ToyotaPartsDeal (Toyota OEM) ↗Amazon ↗
Oil filters (aftermarket)RockAuto ↗Amazon ↗

Hunting a used or discontinued part? Search eBay Motors for Toyota 4Runner 6th Gen parts →

Before you start

Rated for a competent home mechanic with a decent tool kit. Confirm torque figures, fluids and procedures against the factory service manual for your VIN, support the truck on stands rather than a jack, and work at your own risk (disclaimer). Some parts links are affiliate links, which pay us a small commission at no cost to you.

The Boxy Dispatch · monthly

One new guide, one featured rig, one recall worth knowing. Monthly, no spam.

Subscribe and get a free printable inspection checklist for any truck we cover.