DIY repair · Suzuki Jimny JB74 / JB64

Replace a worn rear wheel bearing

DIFFICULTY 3 / 5TIME ≈ Half a day per sideCOST Parts plus labor

Symptoms

A hum or rumble from the rear that changes with speed, or play at the rear wheel when you rock it.

The fix, step by step

  1. Pull the axle shaft, press off the old bearing and retainer, press on the new ABS-type bearing and retainer and fit a new axle oil seal.
  2. BigJimny's rear wheel bearing guide covers the gen 3 procedure; check your gen 4 manual for differences.

Tools & part numbers

  • Slide hammer or puller
  • hydraulic press
  • new retainer ring.

Where to buy the parts

Rear Wheel Bearing Kit (ABS, Gen4)BigJimny ↗Amazon ↗
Rear Axle Oil Seal, Gen4BigJimny ↗Amazon ↗

Hunting a used or discontinued part? Search eBay Motors for Suzuki Jimny JB74 / JB64 parts →

Before you start

Rated for a competent home mechanic with a decent tool kit. Confirm torque figures, fluids and procedures against the factory service manual for your VIN, support the truck on stands rather than a jack, and work at your own risk (disclaimer). Some parts links are affiliate links, which pay us a small commission at no cost to you.

The Boxy Dispatch · monthly

One new guide, one featured rig, one recall worth knowing. Monthly, no spam.

Subscribe and get a free printable inspection checklist for any truck we cover.